Cutting Guide – Use some 16mm thick material to match the parts or take a 3dprinted part to test if the size fits the material. Use for example mdf, honeycomb cardboard or a solid pine panel.
3D model- Printing the piece; We recommend printing a test piece first. This design works with ABS plastic, its untested with PLA. The design needs around 30 pieces for the complete design, so if the test works then you can print two sets of 15 easily. It uses minimum plastic in this design but if you fill in the gaps in the base it can be stronger. Please bear in mind that different machine may print differently! The 3Dprinted design turned out significantly different than the 3D model. Strengthen the ABS piece with acetone treatment.
Build Guide – This is a simple step by step guide on how to construct the shelving unit